Magnetic Vehicle Signs (Signs)

•   All magnetic signs are layered with gloss lamination.

•   Magnum heavy-duty (0.04” / 1mm / 30mil) magnetics.

Document Sizes .....................................................................

•   12" x 18"

•   12" x 24"

•   18" x 24"

•   12" x 42"

•   24" x 72"

Installation .............................................................................
    Make contact of one edge of the sign to the vehicle surface in
    desired location and then let the adjacent part of the sign
    contact the vehicle surface until the entire sign is held
    magnetically to the vehicle. If the sign is not in desired
    position, remove sign & repeat above (Do not try to
    straighten sign by pulling when it is held magnetically
    to the vehicle. It may stretch the material, especially
    when hot.)  Avoid placing your sign over chrome
    trim or surface protrusions of any kind. The temperature
    of the sign should be at least 60 degrees F. during installation.
    (The temperature of the vehicle surface does not matter.) 

Removal .................................................................................
    Always remove the sign by lifting from the center of the two
    opposite sides. Never start at the corners. This precaution
    will avoid bent corners and reduced adhesion. 

Caution ...................................................................................
    Magnetic vehicle signs will not adhere to areas on your car where
    plastic or lead body fillers have been used. Use caution in applying
    vehicle signs to areas of your car that have been damaged and
    repaired in order to avoid losing your sign. New paint jobs take
    time to cure properly. We suggest you wait 60 days before
    positioning a sign on a freshly painted car. 

Maintenance ...........................................................................
    Your signs should be periodically removed...once a week minimum.
    Wipe both the vehicle and the back of the sign dry. Trapped
    moisture, dirt, or chemicals may harm your vehicle finish.
    Clean your sign with plain water and a mild detergent. 

Storage...................................................................................
    To avoid cracking or breaking, do not fold or crease.
    Store your magnetic sign flat.